NCV20072DTBR2G

Manufacturer:	onsemi
Product Category:	Operational Amplifiers – Op Amps
Number of Channels:	2 Channel
GBP – Gain Bandwidth Product:	3 MHz
SR – Slew Rate:	2.4 V/us
Vos – Input Offset Voltage:	1.3 mV
Ib – Input Bias Current:	2 nA
Supply Voltage – Max:	36 V, +/- 18 V
Supply Voltage – Min:	2.7 V, +/- 1.35 V
Operating Supply Current:	465 uA
Output Current per Channel:	65 mA
CMRR – Common Mode Rejection Ratio:	145 dB
en – Input Voltage Noise Density:	30 nV/sqrt Hz
Package / Case:	TSSOP-8
Mounting Style:	SMD/SMT
Shutdown:	No Shutdown
Minimum Operating Temperature:	– 40 C
Maximum Operating Temperature:	+ 125 C
Series:	NCV20071
Qualification:	AEC-Q100
Packaging:	Reel
Packaging:	Cut Tape
Packaging:	MouseReel
3 dB Bandwidth:	–
Amplifier Type:	General Purpose Amplifier
Brand:	onsemi
In – Input Noise Current Density:	90 fA/sqrt Hz
Ios – Input Offset Current:	1 nA
Maximum Dual Supply Voltage:	+/- 18 V
Minimum Dual Supply Voltage:	+/- 1.35 V
Output Type:	Rail-to-Rail
Product:	Operational Amplifiers
Product Type:	Op Amps – Operational Amplifiers
PSRR – Power Supply Rejection Ratio:	135 dB
Factory Pack Quantity:	2500
Subcategory:	Amplifier ICs
THD plus Noise:	0.001 %
Unit Weight:	0.006737 oz

More Information

NCx2007x Operational Amplifiers

onsemi NCx2007x Operational Amplifiers provide rail-to-rail output operation, a 3MHz bandwidth, and single, dual, and quad configurations. The NCx2007x Op Amps operate on supply voltages as low as 2.7V over the temperature range of -40°C to +125°C. Rail-to-rail operation enables the user to use the entire supply voltage range optimally while taking advantage of 3MHz bandwidth. The high bandwidth on the device offers a slew rate of 2.8V/s while only consuming 405A of quiescent current per channel.

Current Sense Amplifiers

onsemi Current Sense Amplifiers monitor current consumption, providing critical information that can assist in the safety and diagnostic functions in a system. These Current Sense Amplifiers minimize BOM space and allow for system flexibility. They are low-cost, highly accurate, power-efficient, and offer minimal impact to battery life. onsemi offers cost-effective standalone Op-Amps and Current Sense Amplifiers that integrate external resistors to offer higher accuracy, smaller solution.

High Performance CMOS Operational Amplifiers

onsemi High-Performance CMOS Operational Amplifiers feature a wide range of general-purpose, low-power, and precision single, dual, and quad devices. The CMOS Op-Amps have the advantage of lower power and higher accuracy operation over traditional bipolar amplifiers, especially in terms of input bias current, quiescent current, and input offset voltage.

Industrial Motor Drives

onsemi Industrial Motor Drives are designed for global sustainability, supplying efficient, renewable technologies and intelligent power. According to the 2020 Motor System Market Analysis (MSMA), published by the US Department of Energy (DOE), industrial pumps and drives annually consume almost 15% of the total US grid. The 2020 MSMA also estimates that 32.3 million metric tons of CO₂ emissions can be saved annually using VFDs. onsemi manufactures a broad range of VFD semiconductor components, including gate drivers, MOSFETs, IGBTs, and EliteSiC.

NCS200x Rail-to-Rail Operational Amplifiers

onsemi NCS200x Rail-to-Rail Operational Amplifiers provide rail-to-rail output operation, and are available in single, dual, and quad configurations. Rail-to-rail operation enables the user to make optimal use of the entire supply voltage range while taking advantage of bandwidth. onsemi NCS200x can operate on supply voltages from 1.8V to 5.5V over the temperature range of −40°C to +125°C.

Reviews

There are no reviews yet.