CG2800LTR

Властивості продукту

Виробник:	Littelfuse
Серія:	CG2
Тип товару:	GDTs – Gas Discharge Tubes / Surge Arresters

Надіслати запит

Категорія: Littelfuse

Опис
Відгуки (0)

Виробник:	Littelfuse
Категорія товару:	Gas Discharge Tubes – GDTs / Gas Plasma Arrestors
Серія:	CG2
Peak Pulse Current:	10 kA
DC Sparkover:	800 V
Number of Electrodes:	2 Electrode
Termination Style:	Axial
Failsafe Protection Y/N:	Failsafe Not Protected
Diameter:	8.1 mm
Довжина:	6.07 mm
Мінімальна робоча температура:	- 40 C
Максимальна робоча температура:	+ 90 C
Пакування:	Котушка.
Пакування:	Розрізати стрічку
Бренд:	Littelfuse
Insulation Resistance:	10 GOhms
Стиль монтажу:	Through Hole
Тип товару:	GDTs – Gas Discharge Tubes / Surge Arresters
Кількість в заводській упаковці:	500
Підкатегорія:	GDTs – Gas Discharge Tubes
Technology:	Gas Discharge Tube
Друкуй:	2 Pole Gas Discharge Tube
Одиниця ваги:	0.103066 oz

Більше інформації

Electrical Vehicle AC Chargers

Littelfuse provides a wide range of products that are suitable for Electric Vehicle AC Chargers. Although simpler in nature compared to DC chargers, AC charging stations safely deliver AC power from the electrical grid into the vehicle. Due to space and weight constraints in the vehicle, on-board chargers and AC charging stations are typically limited to lower amounts of power (22kW or less), which means charging time is slow – taking several hours. These systems also rely on a vehicle’s on-board charger to enable the conversion of AC power from the grid into DC power to charge the vehicle’s battery. It’s critical that proper measures are taken to safeguard both the charger and vehicle.

Off-Board Charger Sub-Unit Power Converters

Littelfuse Off-Board Charger Sub-Unit Power Converters are required for DC charging stations capable of charging to 80% SOC in under 30 minutes. These fast-charging applications require modular power converters, which can be paralleled to cater to different power levels, thereby enabling fast charging. The most critical parameters are energy density and system efficiency. A sub-unit power converter in a DC charging station consists of an AC/DC power stage and DC/DC power stage integrated into the charging station.

On-Board Battery Charger Solutions

Littelfuse On-Board Battery Charger Solutions address the electrical challenges that come with charging an electric vehicle’s ability to charge its battery from a power outlet. Overcurrents, overvoltages, ESD, and input rectifier switching can impact this recharging ability, and Littelfuse delivers a spectrum of fusts, varistors, thyristors to address these threats.

Automotive Application Solutions

Littelfuse Automotive Solutions contain a portfolio of AEC-Q101 and AEC-Q200 qualified TVS diodes, diode arrays, varistors, multilayer varistors, and POLY-FUSE® PTCs. Each new generation of vehicles has an increased number of electronics that control everything from the radio to fuel injection. Littelfuse provides circuit protection solutions for a range of difficult automotive applications.

Electrical Vehicle DC Fast Chargers

DC charging stations are designed to convert the electrical grid’s AC power into DC power that can then be fed directly into a vehicle’s battery system for fast charging – in 30 minutes or less. Because the conversion from AC to DC power is being done in the charging station, these units can provide higher levels of power (50kW to 350kW and beyond) to the vehicle compared to AC charging stations. Working with tens to hundreds of kilowatts of power, efficient conversion, reliability of the system, and user safety are critical.

Відгуки

Відгуків немає, поки що.