LP8867QPWPRQ1

Ürün Özellikleri

Üretici firma:	Texas Instruments
Seri:	LP8867-Q1
Paket / Kasa:	HTSSOP-20
Kanal Sayısı:	4 Channel
Product:	LED Lighting Drivers
Ürün Tipi:	LED Lighting Drivers

Soruşturma Gönder

Kategoriler: Texas Instruments

Açıklama
Değerlendirmeler (0)

Üretici firma:	Texas Instruments
Ürün Kategorisi:	LED Lighting Drivers
Seri:	LP8867-Q1
Montaj Stili:	SMD/SMT
Paket / Kasa:	HTSSOP-20
Number of Outputs:	4 Output
Output Current:	120 mA
Topology:	Boost, SEPIC
Operating Frequency:	300 kHz to 2.2 MHz
Output Voltage:	6 V to 45 V
Minimum Çalışma Sıcaklığı:	- 40 C
Maksimum Çalışma Sıcaklığı:	+ 125 C
Qualification:	AEC-Q100
Paketleme:	Makara
Paketleme:	Kesilmiş Bant
Paketleme:	MouseReel
Features:	Overvoltage Protection
Marka:	Texas Instruments
Input Voltage:	4.5 V to 40 V
Neme Duyarlı:	Evet
Kanal Sayısı:	4 Channel
Product:	LED Lighting Drivers
Ürün Tipi:	LED Lighting Drivers
Fabrika Paket Miktarı:	2000
Alt kategori:	Driver ICs
Supply Current – Max:	12 mA
Tip:	Low EMI
Birim Ağırlık:	0.004526 oz

Daha Fazla Bilgi

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LP886x-Q1 Automotive LED Driver

Texas Instruments LP886x-Q1 Automotive LED Driver is a low-EMI, easy-to-use LED driver with a DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four or three high-precision current sinks that can be combined for higher current capability. The DC-DC converter also has adaptive output voltage control based on the LED forward voltages. This feature minimizes power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction, DC-DC supports a spread spectrum for switching frequency and an external synchronization with a dedicated pin. A wide-range adjustable frequency allows the LP886x-Q1 to avoid disturbance for the sensitive frequency band.

Değerlendirmeler

Henüz değerlendirme yapılmadı.

LP8867QPWPRQ1

Daha Fazla Bilgi

IS32LT3175N/P Single-Channel Linear LED Drivers

LP886x-Q1 Automotive LED Driver

Değerlendirmeler

“LP8867QPWPRQ1” için yorum yapan ilk kişi siz olun Yanıtı iptal et

İlgili ürünler

Giriş