LP8864QRHBRQ1

Tillverkare:	Texas instrument
Produktkategori:	LED Lighting Drivers
Serie:	LP8864-Q1
Monteringstyp:	SMD/SMT
Paket / Fodral:	VQFN-32
Number of Outputs:	4 Output
Output Current:	200 mA
Topology:	Boost, SEPIC
Operating Frequency:	100 kHz to 2.2 MHz
Output Voltage:	48 V
Lägsta driftstemperatur:	- 40 C
Maximal driftstemperatur:	+ 125 C
Förpackning:	Reel
Förpackning:	Klippt tejp
Features:	PWM Dimming, I2C Control
Varumärke:	Texas instrument
Utvecklingssats:	LP8864EVM
Dimming:	PWM
Input Voltage:	3 V to 48 V
Fuktkänslig:	Ja
Antal kanaler:	4 kanaler
Output Type:	Open Drain
Produkt:	LED Lighting Drivers
Produkttyp:	LED Lighting Drivers
Fabriksförpackning Kvantitet:	3000
Underkategori:	Driver ICs
Supply Current – Max:	104 mA

Mer information

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LP8864-Q1 High-Efficiency LED Driver

Texas Instruments LP8864-Q1 High-Efficiency LED Driver comes with a boost controller. The four high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. LED brightness can be controlled globally through the I²C interface or PWM input. The boost controller has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the boost voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the LP8864-Q1 to avoid disturbance from the AM radio band. The Texas Instruments LP8864-Q1 supports built-in hybrid PWM dimming and analog current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency.

Recensioner

Det finns inga recensioner än.

LP8864QRHBRQ1

Mer information

IS32LT3175N/P Single-Channel Linear LED Drivers

LP8864-Q1 High-Efficiency LED Driver

Recensioner

Bli först med att recensera ”LP8864QRHBRQ1” Avbryt svar

Relaterade produkter

Logga in