CG31.5

Свойства продукта

Производитель:	Littelfuse
Серия:	CG3
Тип продукта:	GDTs – Gas Discharge Tubes / Surge Arresters

Отправить запрос

Категория: Littelfuse

Описание
Отзывы (0)

Производитель:	Littelfuse
Категория продукта:	Gas Discharge Tubes – GDTs / Gas Plasma Arrestors
Серия:	CG3
DC Sparkover:	1.5 kV
Number of Electrodes:	2 Electrode
Стиль завершения:	Axial
Failsafe Protection Y/N:	Failsafe Not Protected
Диаметр:	8 mm
Длина:	6 mm
Минимальная рабочая температура:	- 40 C
Максимальная рабочая температура:	+ 90 C
Упаковка:	Bulk
Бренд:	Littelfuse
Insulation Resistance:	10 GOhms
Стиль крепления:	Through Hole
Тип продукта:	GDTs – Gas Discharge Tubes / Surge Arresters
Заводская упаковка Количество:	1200
Подкатегория:	GDTs – Gas Discharge Tubes
Technology:	Gas Discharge Tubes
Тип:	Gas Plasma Arrester
Вес устройства:	0.057539 oz

Дополнительная информация

Electrical Vehicle AC Chargers

Littelfuse provides a wide range of products that are suitable for Electric Vehicle AC Chargers. Although simpler in nature compared to DC chargers, AC charging stations safely deliver AC power from the electrical grid into the vehicle. Due to space and weight constraints in the vehicle, on-board chargers and AC charging stations are typically limited to lower amounts of power (22kW or less), which means charging time is slow – taking several hours. These systems also rely on a vehicle’s on-board charger to enable the conversion of AC power from the grid into DC power to charge the vehicle’s battery. It’s critical that proper measures are taken to safeguard both the charger and vehicle.

Off-Board Charger Sub-Unit Power Converters

Littelfuse Off-Board Charger Sub-Unit Power Converters are required for DC charging stations capable of charging to 80% SOC in under 30 minutes. These fast-charging applications require modular power converters, which can be paralleled to cater to different power levels, thereby enabling fast charging. The most critical parameters are energy density and system efficiency. A sub-unit power converter in a DC charging station consists of an AC/DC power stage and DC/DC power stage integrated into the charging station.

CG3 High-Voltage Gas Discharge Tubes

Littelfuse CG3 High-Voltage Gas Discharge Tubes (GDTs) are two-electrode, 1kV to 7.5kV devices designed for surge protection and high-isolation applications. Littelfuse CG3 GDTs are also designed for applications for which bias voltages or signal levels of several hundred volts are normally present. CG3 offers a low capacitance of <1.5pF and 5kA peak pulse current while operating over a -40°C to +90°C operating temperature range.

AC/DC Power Supply

Littelfuse AC/DC Power Supply is a commonly used building block in electronic designs. The components in these power supply building blocks need to be reliable and long-lasting, and Littelfuse offers a range of products that fit those requirements. This portfolio of components covers overcurrent and overvoltage protection, the power stage, and output protection. Typical applications for Littelfuse AC/DC Power Supply products include automotive, solar, industrial, manufacturing, and more.

Electrical Vehicle DC Fast Chargers

DC charging stations are designed to convert the electrical grid’s AC power into DC power that can then be fed directly into a vehicle’s battery system for fast charging – in 30 minutes or less. Because the conversion from AC to DC power is being done in the charging station, these units can provide higher levels of power (50kW to 350kW and beyond) to the vehicle compared to AC charging stations. Working with tens to hundreds of kilowatts of power, efficient conversion, reliability of the system, and user safety are critical.

Off-Highway Electric Vehicle Solutions

Littelfuse provides a wide range of solutions for off-highway electric vehicles. These electric vehicles share a similar architecture and have a power range from 48V to 400V. Off-highway electric vehicles include electric forklifts, golf carts, three-wheelers, tow tractors, compactors, and excavators.

Отзывы

Отзывов пока нет.