ASL2507SHNY

Свойства продукта

Производитель:	NXP
Серия:	ASL2507SHN
Упаковка / футляр:	HVQFN-32
Количество каналов:	2 Channel
Продукт:	LED Lighting Drivers
Тип продукта:	LED Lighting Drivers

Отправить запрос

Категория: NXP

Описание
Отзывы (0)

Производитель:	NXP
Категория продукта:	LED Lighting Drivers
Серия:	ASL2507SHN
Стиль крепления:	SMD/SMT
Упаковка / футляр:	HVQFN-32
Number of Outputs:	2 Output
Topology:	Boost
Operating Frequency:	125 kHz to 700 kHz
Output Voltage:	Adjustable
Минимальная рабочая температура:	- 40 C
Максимальная рабочая температура:	+ 125 С
Упаковка:	Катушка
Упаковка:	Разрезанная лента
Features:	Thermal Shutdown
Бренд:	NXP Semiconductors
Input Voltage:	5.5 V to 40 V
Чувствительны к влаге:	Да
Количество каналов:	2 Channel
Продукт:	LED Lighting Drivers
Тип продукта:	LED Lighting Drivers
Заводская упаковка Количество:	6000
Подкатегория:	Driver ICs
Supply Current – Max:	250 uA
Тип:	2 Phase
Часть # Псевдонимы:	935307371518
Вес устройства:	0.006744 oz

Дополнительная информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

ASLx507 DC-to-DC Boost Converters

NXP Semiconductors ASLx507 DC-to-DC Boost Converters include single and dual-phase ICs with a programmable limp-home mode. These boost converter ICs include one or two integrated gate drivers which drive external power MOSFETs and integrated Proportional-Integral (PI) controllers. NXP ASLx507 Boost Converters provide an SPI interface for extensive control and diagnostic communication with an external microcontroller. These boost converters allow configurable operation in the limp-home mode if SPI communication with the microcontroller fails. The outputs of the ASLx507 ICs operate according to predefined conditions stored in non-volatile memory (NVM) programmable by the customer in the limp-home mode.

Отзывы

Отзывов пока нет.

ASL2507SHNY

Дополнительная информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ASLx507 DC-to-DC Boost Converters

Отзывы

Будьте первым, кто оставил отзыв на “ASL2507SHNY” Отменить ответ

Похожие товары

Вход в систему