TPS92511DDA

Producent:	Texas Instruments
Kategoria produktu:	LED Lighting Drivers
Seria:	TPS92511
Styl montażu:	SMD/SMT
Opakowanie / etui:	SO-PowerPad-8
Number of Outputs:	1 Output
Output Current:	500 mA
Topology:	Buck
Operating Frequency:	50 kHz to 500 kHz
Output Voltage:	Adjustable
Minimalna temperatura pracy:	- 40 C
Maksymalna temperatura pracy:	+ 125 C
Opakowanie:	Rura
Features:	Adjustable Switch Frequency, Enable/Shutdown, Integrated Switch, Thermal Shutdown
Marka:	Texas Instruments
Dimming:	Analog, PWM
Input Voltage:	4.5 V to 65 V
Wrażliwy na wilgoć:	Tak
Liczba kanałów:	1 Kanał
Output Type:	Constant Current
Typ produktu:	LED Lighting Drivers
Ilość w opakowaniu fabrycznym:	95
Podkategoria:	Driver ICs
Supply Current – Max:	2.7 mA
Typ:	Inductive
Waga jednostki:	0.002490 oz

Więcej informacji

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92511 Constant Current Buck LED Driver

Texas Instruments TPS92511 Constant Current Buck LED Driver is an easy-to-use 65V constant current buck converter for driving a single LED string. This allows current up to 0.5A and with an efficiency of up to 95%. Only 5 external components are required for basic operation. A single-layer PCB layout is feasible because of the integration of an N-MOSFET. There is no external current sensing resistor, no external compensation and it includes the proper terminal assignment. A high-value external resistor programs the LED current so that fine-tuning of the LED current can be achieved. Another high-value external resistor programs a constant switching frequency from 50kHz to 500kHz. EMI design becomes easier as a result of the constant switching frequency. The TPS92511 from Texas Instruments provides a wide input voltage range from 4.5V to 65V. By adding simple external circuits, the device can handle applications with even higher input voltages.

Opinie

Na razie nie ma opinii o produkcie.

TPS92511DDA

Więcej informacji

IS32LT3175N/P Single-Channel Linear LED Drivers

TPS92511 Constant Current Buck LED Driver

Opinie

Napisz pierwszą opinię o „TPS92511DDA” Anuluj pisanie odpowiedzi

Podobne produkty

Logowanie