NSIC2050JBT3G

Producent:	onsemi
Kategoria produktu:	LED Lighting Drivers
REACH – SVHC:
Seria:	NSIC2050JB
Styl montażu:	SMD/SMT
Opakowanie / etui:	SMB-2
Number of Outputs:	1 Output
Output Current:	50 mA
Topology:	Boost, Buck
Operating Frequency:	100 Hz to 100 kHz
Output Voltage:	Adjustable
Minimalna temperatura pracy:	– 55 C
Maksymalna temperatura pracy:	+ 175 C
Opakowanie:	Kołowrotek
Opakowanie:	Taśma cięta
Opakowanie:	MouseReel
Features:	Constant Current
Marka:	onsemi
Input Voltage:	120 V
Liczba kanałów:	1 Kanał
Output Type:	–
Pd – Power Dissipation:	3 W
Produkt:	Constant Current LED Drivers
Typ produktu:	LED Lighting Drivers
Ilość w opakowaniu fabrycznym:	2500
Podkategoria:	Driver ICs
Supply Current – Max:	34.5 mA
Waga jednostki:	0.003280 oz

Więcej informacji

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NSIC20x0 LED Drivers

onsemis NSIC20x0 LED Drivers use a linear Constant Current Regulator (CCR), a simple, economical and robust device designed to provide a cost-effective solution for regulating current in LEDs (similar to Constant Current Diode, CCD). The CCR is based on Self-Biased Transistor (SBT) technology and regulates current over a wide voltage range. It is designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and currents. The CCR turns on immediately and requires no external components allowing it to be designed as a high or low-side regulator. The 120V anode-cathode voltage rating is designed to withstand the high peak voltage incurred in A/C offline applications. The high anode-cathode voltage rating of the onsemis NSIC20x0 LED Drivers withstands surges common in automotive, industrial and commercial signage applications.

Opinie

Na razie nie ma opinii o produkcie.

NSIC2050JBT3G

Więcej informacji

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NSIC20x0 LED Drivers

Opinie

Napisz pierwszą opinię o „NSIC2050JBT3G” Anuluj pisanie odpowiedzi

Podobne produkty

Logowanie