NCS21911SN2T1G

Producent:	onsemi
Kategoria produktu:	Precision Amplifiers
Liczba kanałów:	1 Kanał
GBP – produkt zwiększający przepustowość:	2 MHz
SR – Szybkość narastania:	1.6 V/us
Vos – napięcie niezrównoważenia wejścia:	1 uV
Ib – wejściowy prąd polaryzacji:	500 pA
Napięcie zasilania - maks:	36 V
Napięcie zasilania - min:	4 V
Roboczy prąd zasilania:	475 uA
Prąd wyjściowy na kanał:	18 mA
CMRR – współczynnik odrzucenia trybu wspólnego:	140 dB
pl – Gęstość szumów napięcia wejściowego:	22 nV/sqrt Hz
Opakowanie / etui:	TSOP-5
Styl montażu:	SMD/SMT
Zamknięcie:	Brak wyłączenia
Minimalna temperatura pracy:	- 40 C
Maksymalna temperatura pracy:	+ 125 C
Seria:	NCS21911
Opakowanie:	Kołowrotek
Opakowanie:	Taśma cięta
Opakowanie:	MouseReel
Typ wzmacniacza:	Precision Operational Amplifier
Marka:	onsemi
In – Input Noise Current Density:	100 fA/sqrt Hz
Ios – Input Offset Current:	500 pA
Output Type:	Rail-to-Rail
Produkt:	Wzmacniacze operacyjne
Typ produktu:	Precision Amplifiers
PSRR – współczynnik odrzucenia zasilania:	154 dB
Settling Time:	20 us
Ilość w opakowaniu fabrycznym:	3000
Podkategoria:	Układy scalone wzmacniacza
THD plus Noise:	0.0003 %
Wzmocnienie napięcia dB:	150 dB
Waga jednostki:	0.356867 oz

Więcej informacji

NCx2191x Precision Operational Amplifiers

onsemi NCx2191x Precision Operational Amplifiers offer low offset voltage and zero drift over temperature. The NCx2191x Amplifiers feature a maximum offset voltage of 25V and an input common-mode voltage range that includes ground. This makes the NCx2191x Amps well-suited for applications where precision is required, such as low side current sensing and interfacing with sensors. Automotive qualified options are available under the NCV prefix.

Current Sense Amplifiers

onsemi Current Sense Amplifiers monitor current consumption, providing critical information that can assist in the safety and diagnostic functions in a system. These Current Sense Amplifiers minimize BOM space and allow for system flexibility. They are low-cost, highly accurate, power-efficient, and offer minimal impact to battery life. onsemi offers cost-effective standalone Op-Amps and Current Sense Amplifiers that integrate external resistors to offer higher accuracy, smaller solution.

High Performance CMOS Operational Amplifiers

onsemi High-Performance CMOS Operational Amplifiers feature a wide range of general-purpose, low-power, and precision single, dual, and quad devices. The CMOS Op-Amps have the advantage of lower power and higher accuracy operation over traditional bipolar amplifiers, especially in terms of input bias current, quiescent current, and input offset voltage.

Industrial Motor Drives

onsemi Industrial Motor Drives are designed for global sustainability, supplying efficient, renewable technologies and intelligent power. According to the 2020 Motor System Market Analysis (MSMA), published by the US Department of Energy (DOE), industrial pumps and drives annually consume almost 15% of the total US grid. The 2020 MSMA also estimates that 32.3 million metric tons of CO₂ emissions can be saved annually using VFDs. onsemi manufactures a broad range of VFD semiconductor components, including gate drivers, MOSFETs, IGBTs, and EliteSiC.

Opinie

Na razie nie ma opinii o produkcie.