LP8867QPWPRQ1

Producent:	Texas Instruments
Kategoria produktu:	LED Lighting Drivers
Seria:	LP8867-Q1
Styl montażu:	SMD/SMT
Opakowanie / etui:	HTSSOP-20
Number of Outputs:	4 Output
Output Current:	120 mA
Topology:	Boost, SEPIC
Operating Frequency:	300 kHz to 2.2 MHz
Output Voltage:	6 V to 45 V
Minimalna temperatura pracy:	- 40 C
Maksymalna temperatura pracy:	+ 125 C
Kwalifikacja:	AEC-Q100
Opakowanie:	Kołowrotek
Opakowanie:	Taśma cięta
Opakowanie:	MouseReel
Features:	Overvoltage Protection
Marka:	Texas Instruments
Input Voltage:	4.5 V to 40 V
Wrażliwy na wilgoć:	Tak
Liczba kanałów:	4 kanał
Produkt:	LED Lighting Drivers
Typ produktu:	LED Lighting Drivers
Ilość w opakowaniu fabrycznym:	2000
Podkategoria:	Driver ICs
Supply Current – Max:	12 mA
Typ:	Low EMI
Waga jednostki:	0.004526 oz

Więcej informacji

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LP886x-Q1 Automotive LED Driver

Texas Instruments LP886x-Q1 Automotive LED Driver is a low-EMI, easy-to-use LED driver with a DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four or three high-precision current sinks that can be combined for higher current capability. The DC-DC converter also has adaptive output voltage control based on the LED forward voltages. This feature minimizes power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction, DC-DC supports a spread spectrum for switching frequency and an external synchronization with a dedicated pin. A wide-range adjustable frequency allows the LP886x-Q1 to avoid disturbance for the sensitive frequency band.

Opinie

Na razie nie ma opinii o produkcie.

LP8867QPWPRQ1

Więcej informacji

IS32LT3175N/P Single-Channel Linear LED Drivers

LP886x-Q1 Automotive LED Driver

Opinie

Napisz pierwszą opinię o „LP8867QPWPRQ1” Anuluj pisanie odpowiedzi

Podobne produkty

Logowanie