TLC6C5748QDCARQ1

Producent:	Texas Instruments
Kategoria produktu:	LED Lighting Drivers
Seria:	TLC6C5748-Q1
Styl montażu:	SMD/SMT
Opakowanie / etui:	HTSSOP-56
Number of Outputs:	48 Output
Output Current:	31.9 mA
Topology:	Boost
Operating Frequency:	33 MHz
Output Voltage:	Adjustable
Minimalna temperatura pracy:	- 40 C
Maksymalna temperatura pracy:	+ 125 C
Opakowanie:	Kołowrotek
Opakowanie:	Taśma cięta
Features:	Dot Correction, LED Open Detection, PWM Control
Marka:	Texas Instruments
Zestaw deweloperski:	TLC6C5748EVM
High Level Output Current:	– 2 mA
Input Voltage:	3 V to 5.5 V
Low Level Output Current:	2 mA
Wrażliwy na wilgoć:	Tak
Liczba kanałów:	48 Channel
Produkt:	Sterowniki LED
Typ produktu:	LED Lighting Drivers
Ilość w opakowaniu fabrycznym:	2000
Podkategoria:	Driver ICs
Supply Current – Max:	20 mA

Więcej informacji

TLC6C5748-Q1 48-Channel PWM LED Driver

Texas Instruments TLC6C5748-Q1 48-Channel PWM LED Driver is a 48-channel, 16-bit constant-current sink driver. Each channel has an individually-adjustable pulse width modulation (PWM), grayscale (GS) brightness control with 65,536 steps and 128 steps of constant-current dot correction (DC). DC adjusts brightness deviation between channels. All channels have a 128-step global brightness control (BC). BC adjusts brightness deviation between the R, G, B color groups. The eight-step maximum current control (MC) selects the maximum output current range for all channels of each color group. GS, DC, BC, and MC data are accessible with a serial interface port. The Texas Instruments TLC6C5748-Q1 has three error flags: LED open detection (LOD), LED short detection (LSD), and thermal shutdown (TSD). The error detection results can be read with a serial interface port.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Opinie

Na razie nie ma opinii o produkcie.

TLC6C5748QDCARQ1

Więcej informacji

TLC6C5748-Q1 48-Channel PWM LED Driver

IS32LT3175N/P Single-Channel Linear LED Drivers

Opinie

Napisz pierwszą opinię o „TLC6C5748QDCARQ1” Anuluj pisanie odpowiedzi

Podobne produkty

Logowanie