MCP4725A0T-E/CH

Producent:	Microchip
Kategoria produktu:	Digital to Analog Converters – DAC
Seria:	MCP4725
Resolution:	12 bit
Sampling Rate:	–
Liczba kanałów:	1 Kanał
Settling Time:	6 us
Output Type:	Voltage Buffered
Typ interfejsu:	2-Wire, I2C
Analog Supply Voltage:	2.7 V to 5.5 V
Digital Supply Voltage:	2.7 V to 5.5 V
Minimalna temperatura pracy:	- 40 C
Maksymalna temperatura pracy:	+ 125 C
Styl montażu:	SMD/SMT
Opakowanie / etui:	SOT-23A
Kwalifikacja:	AEC-Q100
Opakowanie:	Kołowrotek
Opakowanie:	Taśma cięta
Opakowanie:	MouseReel
Architecture:	Resistor-String
Marka:	Microchip Technology
DNL – Differential Nonlinearity:	+/- 0.2 LSB
Wysokość:	1.3 mm
INL – Integral Nonlinearity:	+/- 2 LSB
Długość:	3.1 mm
Number of Converters:	1 Converter
Roboczy prąd zasilania:	210 uA
Napięcie zasilania podczas pracy:	3,3 V, 5 V
Typ produktu:	DACs – Digital to Analog Converters
Reference Type:	External
Ilość w opakowaniu fabrycznym:	3000
Podkategoria:	Data Converter ICs
Napięcie zasilania - maks:	5.5 V
Napięcie zasilania - min:	2.7 V
Waga jednostki:	0.001658 oz

Więcej informacji

Automotive Analog Products

Designers of electronic control modules within the automobile are being challenged to deliver increased performance in a variety of systems including powertrain, chassis, comfort, driver information, entertainment, and safety. Microchip Technology’s broad portfolio of low-power analog products enables the development of cost-effective solutions that address these challenges and others facing the system designer. As one of the first companies to apply Non-Volatile Memory (NVM) technology to the development process for analog products, Microchip has utilized its NVM experience to deliver innovative analog solutions with unchallenged electrical characteristics.

MCP4725 Digital-to-Analog Converter

Microchip MCP4725 Digital-to-Analog Converter is a single-channel, 12-bit, voltage output DAC with integrated EEPROM and an I²C Compatible Serial Interface. The MCP4725 DAC offers integrated non-volatile memory (EEPROM) which allows DAC register and configuration bit values to be saves at powered off. The VREF pin or the device VDD can be selected as the DAC’s reference voltage. Power-Down modes enable system current reduction when the DAC output voltage is not required.

Opinie

Na razie nie ma opinii o produkcie.

MCP4725A0T-E/CH

Więcej informacji

Automotive Analog Products

MCP4725 Digital-to-Analog Converter

Opinie

Napisz pierwszą opinię o „MCP4725A0T-E/CH” Anuluj pisanie odpowiedzi

Podobne produkty

Logowanie