NCV20061SQ3T2G

Fabrikant:	onsemi
Productcategorie:	Operational Amplifiers – Op Amps
Aantal kanalen:	1 Kanaal
GBP – Gain Bandwidth Product:	3 MHz
SR – Slew Rate:	1.2 V/us
Vos – Input Offset Voltage:	4 mV
Ib – Input Bias Current:	1.5 nA
Voedingsspanning - Max:	5.5 V
Voedingsspanning - Min:	1.8 V
Operating Supply Current:	125 uA
Output Current per Channel:	19 mA
CMRR – Common Mode Rejection Ratio:	79 dB
en – Input Voltage Noise Density:	20 nV/sqrt Hz
Verpakking/hoes:	SC-70-5
Montagestijl:	SMD/SMT
Afsluiten:	Geen afsluiting
Minimale bedrijfstemperatuur:	- 40 C
Maximale bedrijfstemperatuur:	+ 125 C
Serie:	NCS20061
Qualification:	AEC-Q101
Verpakking:	Haspel
Verpakking:	Snijband
Verpakking:	MouseReel
3 dB Bandwidth:	–
Amplifier Type:	Low Power Operational Amplifier
Merk:	onsemi
In – Input Noise Current Density:	300 fA/sqrt Hz
Invoertype:	Rail-to-Rail
Ios – Input Offset Current:	1.1 nA
Output Type:	Rail-to-Rail
Product:	Operational Amplifiers
Type product:	Op Amps – Operational Amplifiers
PSRR – Power Supply Rejection Ratio:	90 dB
Hoeveelheid fabrieksverpakking:	3000
Subcategorie:	Amplifier ICs
THD plus Noise:	0.005 %
Gewicht per eenheid:	0.000212 oz

Meer informatie

NCx2006x Operational Amplifiers

onsemi NCx2006x Operational Amplifiers provide rail-to-rail input and output operation, 3MHz bandwidth, and are available in single, dual, and quad configurations. The NCx2006x features a supply voltage from 1.8V to 5.5V over a temperature range of -40°C to +125°C. The rail-to-rail operation allows the use of the entire supply voltage range while taking advantage of the 3MHz bandwidth.

Current Sense Amplifiers

onsemi Current Sense Amplifiers monitor current consumption, providing critical information that can assist in the safety and diagnostic functions in a system. These Current Sense Amplifiers minimize BOM space and allow for system flexibility. They are low-cost, highly accurate, power-efficient, and offer minimal impact to battery life. onsemi offers cost-effective standalone Op-Amps and Current Sense Amplifiers that integrate external resistors to offer higher accuracy, smaller solution.

High Performance CMOS Operational Amplifiers

onsemi High-Performance CMOS Operational Amplifiers feature a wide range of general-purpose, low-power, and precision single, dual, and quad devices. The CMOS Op-Amps have the advantage of lower power and higher accuracy operation over traditional bipolar amplifiers, especially in terms of input bias current, quiescent current, and input offset voltage.

Beoordelingen

Er zijn nog geen beoordelingen.

NCV20061SQ3T2G

Meer informatie

NCx2006x Operational Amplifiers

Current Sense Amplifiers

High Performance CMOS Operational Amplifiers

Beoordelingen

Wees de eerste om “NCV20061SQ3T2G” te beoordelen Reactie annuleren

Gerelateerde producten

Inloggen