NCV7691D10R2G

Proprietร  del prodotto

Produttore:
 onsemi
Serie:
 NCV7691
Pacchetto / Custodia:
 SOIC-8
Numero di canali: 1 Canale
Prodotto: LED Drivers
Tipo di prodotto: LED Lighting Drivers

 

Categoria:
Produttore:
 onsemi
Categoria di prodotti: LED Lighting Drivers
Serie:
 NCV7691
Stile di montaggio:
 SMD/SMT
Pacchetto / Custodia:
 SOIC-8
Number of Outputs:
 1 Output
Output Current:
 25 mA
Topology:
 Boost, Buck
Operating Frequency:
 100 kHz
Output Voltage:
 Adjustable
Temperatura minima di esercizio:
 - 40 C
Temperatura massima di esercizio:
 + 150 C
Qualification:
 AEC-Q100
Imballaggio:
 Mulinello
Imballaggio:
 Taglio del nastro
Imballaggio:
 MouseReel
Features:
 PWM Dimming, Constant Current
Marchio: onsemi
Input Voltage: 4.5 V to 18 V
Sensibile all'umiditร : Sรฌ
Numero di canali: 1 Canale
Tensione di alimentazione operativa: 4.5 V to 18 V
Output Type: Constant Current
Prodotto: LED Drivers
Tipo di prodotto: LED Lighting Drivers
Quantitร  della confezione di fabbrica: 3000
Sottocategoria: Driver ICs
Supply Current – Max: 4 mA
Tipo: Current Controller
Peso dell'unitร : 0,019048 oz

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NCV7691 Current Controller

onsemi NCV761 Current Controller provides an external NPN bipolar device to drive LEDs. The LED brightness levels are programmed using an external resistor with a bipolar transistor increasing the current range. The NCV7691 controller LED driver is flexible to add a single channel to multichannel systems. Features include Pulse Width Modulation (PWM) control, multiple LED string control, open LED string, and short-circuit LED string diagnostic. The current controller is Pb-free, and automotive-Q100 qualified. The onsemi NCV7691 is ideal for automotive LED lamps, Rear Combination Lamps (RCL), fog lights, and automotive linear current LED drivers.

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “NCV7691D10R2G”

Prodotti correlati

Anteprima

NE521DR2G

Anteprima

SA572DR2G

Anteprima

NCV2904DMR2G

Anteprima

NCV20072DR2G

Segnaposto
Anteprima

NCV0372BDWR2G

Anteprima

NCS21912DMR2G

Anteprima

NCS20091MUTAG

Anteprima

NCV20061SQ3T2G

it_ITIT
en_USEN arAR bg_BGBG cs_CZCS da_DKDA nl_NLNL etET fiFI fr_FRFR de_DEDE elEL hu_HUHU jaJA ko_KRKO nb_NONB pl_PLPL ru_RURU es_ARES sv_SESV tr_TRTR ukUK it_ITIT