FL7760AM6X

Produttore:	onsemi
Categoria di prodotti:	LED Lighting Drivers
Serie:	FL7760
Stile di montaggio:	SMD/SMT
Pacchetto / Custodia:	SOT-23-6
Number of Outputs:	1 Output
Output Current:	2.5 A
Topology:	Buck
Operating Frequency:	1 megahertz
Output Voltage:	4.5 V to 5.5 V
Temperatura minima di esercizio:	- 40 C
Temperatura massima di esercizio:	+ 125 C
Imballaggio:	Mulinello
Imballaggio:	Taglio del nastro
Imballaggio:	MouseReel
Features:	Constant Current
Marchio:	onsemi
Input Voltage:	8 V to 60 V
Sensibile all'umidità:	Sì
Numero di canali:	1 Canale
Output Type:	Constant Current
Pd – Power Dissipation:	247 mW
Prodotto:	LED Drivers
Tipo di prodotto:	LED Lighting Drivers
Quantità della confezione di fabbrica:	3000
Sottocategoria:	Driver ICs
Supply Current – Max:	495 uA
Tipo:	Buck Controller
Larghezza:	1.6 mm
Peso dell'unità:	0.006578 oz

Ulteriori informazioni

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

FL7760 CCM Buck Controllers

onsemi FL7760 CCM Buck Controllers are step-down controllers designed to adapt hysteretic reference architecture. This hysteretic reference architecture regulates LED current by sensing voltage across the external high-side sense resistor. By implementing hysteretic LED current control, the FL7760 buck controller stabilizes the LED current against input voltage and output load transient condition. These FL7760 Continuous Conduction Mode (CCM) controllers feature wide input range, high switching frequency, high source/sink current, and cycle-by-cycle peak current limit. FL7760 controllers implement analog dimming and PWM through a DIM pin and provide Undervoltage Lockout (UVLO) and Thermal Shutdown (TSD) protections. FL7760 controllers have low-reference voltage to maximize system efficiency and can minimize system profile in wide-scale power ranges through its high-frequency driving capability. onsemi FL7760 CCM buck controllers are ideal for LED lighting systems.

Recensioni

Ancora non ci sono recensioni.

FL7760AM6X

Ulteriori informazioni

IS32LT3175N/P Single-Channel Linear LED Drivers

FL7760 CCM Buck Controllers

Recensioni

Recensisci per primo “FL7760AM6X” Annulla risposta

Prodotti correlati

Accedi