LP8867QPWPRQ1

Produttore:	Texas Instruments
Categoria di prodotti:	LED Lighting Drivers
Serie:	LP8867-Q1
Stile di montaggio:	SMD/SMT
Pacchetto / Custodia:	HTSSOP-20
Number of Outputs:	4 Output
Output Current:	120 mA
Topology:	Boost, SEPIC
Operating Frequency:	300 kHz to 2.2 MHz
Output Voltage:	6 V to 45 V
Temperatura minima di esercizio:	- 40 C
Temperatura massima di esercizio:	+ 125 C
Qualification:	AEC-Q100
Imballaggio:	Mulinello
Imballaggio:	Taglio del nastro
Imballaggio:	MouseReel
Features:	Overvoltage Protection
Marchio:	Texas Instruments
Input Voltage:	4.5 V to 40 V
Sensibile all'umidità:	Sì
Numero di canali:	4 Channel
Prodotto:	LED Lighting Drivers
Tipo di prodotto:	LED Lighting Drivers
Quantità della confezione di fabbrica:	2000
Sottocategoria:	Driver ICs
Supply Current – Max:	12 mA
Tipo:	Low EMI
Peso dell'unità:	0.004526 oz

Ulteriori informazioni

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LP886x-Q1 Automotive LED Driver

Texas Instruments LP886x-Q1 Automotive LED Driver is a low-EMI, easy-to-use LED driver with a DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four or three high-precision current sinks that can be combined for higher current capability. The DC-DC converter also has adaptive output voltage control based on the LED forward voltages. This feature minimizes power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction, DC-DC supports a spread spectrum for switching frequency and an external synchronization with a dedicated pin. A wide-range adjustable frequency allows the LP886x-Q1 to avoid disturbance for the sensitive frequency band.

Recensioni

Ancora non ci sono recensioni.

LP8867QPWPRQ1

Ulteriori informazioni

IS32LT3175N/P Single-Channel Linear LED Drivers

LP886x-Q1 Automotive LED Driver

Recensioni

Recensisci per primo “LP8867QPWPRQ1” Annulla risposta

Prodotti correlati

Accedi