NCV7691D10R2G

Gyártó:	onsemi
Termékkategória:	LED Lighting Drivers
Sorozat:	NCV7691
Szerelési stílus:	SMD/SMT
Csomag / tok:	SOIC-8
Number of Outputs:	1 Output
Output Current:	25 mA
Topology:	Boost, Buck
Operating Frequency:	100 kHz
Output Voltage:	Adjustable
Minimális üzemi hőmérséklet:	- 40 C
Maximális üzemi hőmérséklet:	+ 150 C
Qualification:	AEC-Q100
Csomagolás:	Reel
Csomagolás:	Vágott szalag
Csomagolás:	MouseReel
Features:	PWM Dimming, Constant Current
Márka:	onsemi
Input Voltage:	4.5 V to 18 V
Nedvességérzékeny:	Igen
Csatornák száma:	1 csatorna
Működési tápfeszültség:	4.5 V to 18 V
Output Type:	Constant Current
Product:	LED Drivers
Terméktípus:	LED Lighting Drivers
Gyári csomag mennyisége:	3000
Alkategória:	Driver ICs
Supply Current – Max:	4 mA
Típus:	Current Controller
Egységsúly:	0,019048 oz

További információ

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NCV7691 Current Controller

onsemi NCV761 Current Controller provides an external NPN bipolar device to drive LEDs. The LED brightness levels are programmed using an external resistor with a bipolar transistor increasing the current range. The NCV7691 controller LED driver is flexible to add a single channel to multichannel systems. Features include Pulse Width Modulation (PWM) control, multiple LED string control, open LED string, and short-circuit LED string diagnostic. The current controller is Pb-free, and automotive-Q100 qualified. The onsemi NCV7691 is ideal for automotive LED lamps, Rear Combination Lamps (RCL), fog lights, and automotive linear current LED drivers.

Értékelések

Még nincsenek értékelések.

NCV7691D10R2G

További információ

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NCV7691 Current Controller

Értékelések

„NCV7691D10R2G” értékelése elsőként Válasz megszakítása

Kapcsolódó termékek

Bejelentkezés