NCS21911SN2T1G

Gyártó:	onsemi
Termékkategória:	Precision Amplifiers
Csatornák száma:	1 csatorna
GBP – Gain Bandwidth Product:	2 MHz
SR – Slew Rate:	1.6 V/us
Vos – Input Offset Voltage:	1 uV
Ib – Input Bias Current:	500 pA
Tápfeszültség - Max:	36 V
Tápfeszültség - Min:	4 V
Operating Supply Current:	475 uA
Output Current per Channel:	18 mA
CMRR – Common Mode Rejection Ratio:	140 dB
en – Input Voltage Noise Density:	22 nV/sqrt Hz
Csomag / tok:	TSOP-5
Szerelési stílus:	SMD/SMT
Shutdown:	No Shutdown
Minimális üzemi hőmérséklet:	- 40 C
Maximális üzemi hőmérséklet:	+ 125 C
Sorozat:	NCS21911
Csomagolás:	Reel
Csomagolás:	Vágott szalag
Csomagolás:	MouseReel
Amplifier Type:	Precision Operational Amplifier
Márka:	onsemi
In – Input Noise Current Density:	100 fA/sqrt Hz
Ios – Input Offset Current:	500 pA
Output Type:	Rail-to-Rail
Product:	Operational Amplifiers
Terméktípus:	Precision Amplifiers
PSRR – Power Supply Rejection Ratio:	154 dB
Settling Time:	20 us
Gyári csomag mennyisége:	3000
Alkategória:	Amplifier ICs
THD plus Noise:	0.0003 %
Voltage Gain dB:	150 dB
Egységsúly:	0.356867 oz

További információ

NCx2191x Precision Operational Amplifiers

onsemi NCx2191x Precision Operational Amplifiers offer low offset voltage and zero drift over temperature. The NCx2191x Amplifiers feature a maximum offset voltage of 25V and an input common-mode voltage range that includes ground. This makes the NCx2191x Amps well-suited for applications where precision is required, such as low side current sensing and interfacing with sensors. Automotive qualified options are available under the NCV prefix.

Current Sense Amplifiers

onsemi Current Sense Amplifiers monitor current consumption, providing critical information that can assist in the safety and diagnostic functions in a system. These Current Sense Amplifiers minimize BOM space and allow for system flexibility. They are low-cost, highly accurate, power-efficient, and offer minimal impact to battery life. onsemi offers cost-effective standalone Op-Amps and Current Sense Amplifiers that integrate external resistors to offer higher accuracy, smaller solution.

High Performance CMOS Operational Amplifiers

onsemi High-Performance CMOS Operational Amplifiers feature a wide range of general-purpose, low-power, and precision single, dual, and quad devices. The CMOS Op-Amps have the advantage of lower power and higher accuracy operation over traditional bipolar amplifiers, especially in terms of input bias current, quiescent current, and input offset voltage.

Industrial Motor Drives

onsemi Industrial Motor Drives are designed for global sustainability, supplying efficient, renewable technologies and intelligent power. According to the 2020 Motor System Market Analysis (MSMA), published by the US Department of Energy (DOE), industrial pumps and drives annually consume almost 15% of the total US grid. The 2020 MSMA also estimates that 32.3 million metric tons of CO₂ emissions can be saved annually using VFDs. onsemi manufactures a broad range of VFD semiconductor components, including gate drivers, MOSFETs, IGBTs, and EliteSiC.

Értékelések

Még nincsenek értékelések.