NCV7691D10R2G

Fabricant :	onsemi
Catégorie de produit :	LED Lighting Drivers
Série :	NCV7691
Style de montage :	SMD/SMT
Emballage / Caisse :	SOIC-8
Number of Outputs:	1 Output
Output Current:	25 mA
Topology:	Boost, Buck
Operating Frequency:	100 kHz
Output Voltage:	Adjustable
Température minimale de fonctionnement :	- 40 C
Température de fonctionnement maximale :	+ 150 C
Qualification:	AEC-Q100
Emballage :	Enrouleur
Emballage :	Ruban coupé
Emballage :	MouseReel
Features:	PWM Dimming, Constant Current
Marque :	onsemi
Input Voltage:	4.5 V to 18 V
Sensible à l'humidité :	Oui
Nombre de canaux :	1 Canal
Tension d'alimentation opérationnelle :	4.5 V to 18 V
Output Type:	Constant Current
Produit:	LED Drivers
Type de produit :	LED Lighting Drivers
Quantité d'emballage d'usine :	3000
Sous-catégorie :	Driver ICs
Supply Current – Max:	4 mA
Type :	Current Controller
Poids unitaire :	0.019048 oz

Plus d'informations

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NCV7691 Current Controller

onsemi NCV761 Current Controller provides an external NPN bipolar device to drive LEDs. The LED brightness levels are programmed using an external resistor with a bipolar transistor increasing the current range. The NCV7691 controller LED driver is flexible to add a single channel to multichannel systems. Features include Pulse Width Modulation (PWM) control, multiple LED string control, open LED string, and short-circuit LED string diagnostic. The current controller is Pb-free, and automotive-Q100 qualified. The onsemi NCV7691 is ideal for automotive LED lamps, Rear Combination Lamps (RCL), fog lights, and automotive linear current LED drivers.

Avis

Il n’y a pas encore d’avis.

NCV7691D10R2G

Plus d'informations

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NCV7691 Current Controller

Avis

Soyez le premier à laisser votre avis sur “NCV7691D10R2G” Annuler la réponse

Produits similaires

Se connecter