NCS21911SN2T1G

Fabricant :	onsemi
Catégorie de produit :	Precision Amplifiers
Nombre de canaux :	1 Canal
GBP – Gain Bandwidth Product:	2 MHz
SR – Slew Rate:	1.6 V/us
Vos – Input Offset Voltage:	1 uV
Ib – Input Bias Current:	500 pA
Tension d'alimentation - Max :	36 V
Tension d'alimentation - Min :	4 V
Operating Supply Current:	475 uA
Output Current per Channel:	18 mA
CMRR – Common Mode Rejection Ratio:	140 dB
en – Input Voltage Noise Density:	22 nV/sqrt Hz
Emballage / Caisse :	TSOP-5
Style de montage :	SMD/SMT
Shutdown:	No Shutdown
Température minimale de fonctionnement :	- 40 C
Température de fonctionnement maximale :	+ 125 C
Série :	NCS21911
Emballage :	Enrouleur
Emballage :	Ruban coupé
Emballage :	MouseReel
Amplifier Type:	Precision Operational Amplifier
Marque :	onsemi
In – Input Noise Current Density:	100 fA/sqrt Hz
Ios – Input Offset Current:	500 pA
Output Type:	Rail-to-Rail
Produit:	Operational Amplifiers
Type de produit :	Precision Amplifiers
PSRR – Power Supply Rejection Ratio:	154 dB
Settling Time:	20 us
Quantité d'emballage d'usine :	3000
Sous-catégorie :	Amplifier ICs
THD plus Noise:	0.0003 %
Voltage Gain dB:	150 dB
Poids unitaire :	0.356867 oz

Plus d'informations

NCx2191x Precision Operational Amplifiers

onsemi NCx2191x Precision Operational Amplifiers offer low offset voltage and zero drift over temperature. The NCx2191x Amplifiers feature a maximum offset voltage of 25V and an input common-mode voltage range that includes ground. This makes the NCx2191x Amps well-suited for applications where precision is required, such as low side current sensing and interfacing with sensors. Automotive qualified options are available under the NCV prefix.

Current Sense Amplifiers

onsemi Current Sense Amplifiers monitor current consumption, providing critical information that can assist in the safety and diagnostic functions in a system. These Current Sense Amplifiers minimize BOM space and allow for system flexibility. They are low-cost, highly accurate, power-efficient, and offer minimal impact to battery life. onsemi offers cost-effective standalone Op-Amps and Current Sense Amplifiers that integrate external resistors to offer higher accuracy, smaller solution.

High Performance CMOS Operational Amplifiers

onsemi High-Performance CMOS Operational Amplifiers feature a wide range of general-purpose, low-power, and precision single, dual, and quad devices. The CMOS Op-Amps have the advantage of lower power and higher accuracy operation over traditional bipolar amplifiers, especially in terms of input bias current, quiescent current, and input offset voltage.

Industrial Motor Drives

onsemi Industrial Motor Drives are designed for global sustainability, supplying efficient, renewable technologies and intelligent power. According to the 2020 Motor System Market Analysis (MSMA), published by the US Department of Energy (DOE), industrial pumps and drives annually consume almost 15% of the total US grid. The 2020 MSMA also estimates that 32.3 million metric tons of CO₂ emissions can be saved annually using VFDs. onsemi manufactures a broad range of VFD semiconductor components, including gate drivers, MOSFETs, IGBTs, and EliteSiC.

Avis

Il n’y a pas encore d’avis.