LM3402MR/NOPB

Fabricant :	Texas Instruments
Catégorie de produit :	LED Lighting Drivers
Série :	LM3402
Style de montage :	SMD/SMT
Emballage / Caisse :	SO-PowerPad-8
Number of Outputs:	1 Output
Output Current:	500 mA
Topology:	Buck
Operating Frequency:	10 kHz to 1 MHz
Output Voltage:	40 V
Température minimale de fonctionnement :	- 40 C
Température de fonctionnement maximale :	+ 125 C
Emballage :	Tube
Features:	PWM Dimming, Constant Current
Marque :	Texas Instruments
Dimming:	PWM
Hauteur :	1.47 mm
Input Voltage:	6 V to 42 V
Longueur :	4.9 mm
Sensible à l'humidité :	Oui
Nombre de canaux :	1 Canal
Output Type:	Adjustable
Produit:	Step Down
Type de produit :	LED Lighting Drivers
Quantité d'emballage d'usine :	95
Sous-catégorie :	Driver ICs
Supply Current – Max:	900 uA
Type :	Inductive
Largeur :	3.9 mm
Poids unitaire :	0.002995 oz

Plus d'informations

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LM3402/LM3402HV Constant Current Buck Regulators

Texas Instruments LM3402/LM3402HV Constant Current Buck Regulators are monolithic switching regulators designed to deliver constant currents to high-power LEDs. Ideal for automotive, industrial, and general lighting applications, they contain a high-side N-channel MOSFET switch with a current limit of 735mA for step-down (Buck) regulators. Hysteretic control with controlled on-time is coupled with an external resistor. This allows the converter output voltage to adjust as needed to deliver a constant current to series and series – parallel-connected arrays of LEDs. They can be of varying number and type, LED dimming by pulse width modulation (PWM) or broken/open LED protection. Low-power shutdown and thermal shutdown complete the feature set available with this device.

Avis

Il n’y a pas encore d’avis.

LM3402MR/NOPB

Plus d'informations

IS32LT3175N/P Single-Channel Linear LED Drivers

LM3402/LM3402HV Constant Current Buck Regulators

Avis

Soyez le premier à laisser votre avis sur “LM3402MR/NOPB” Annuler la réponse

Produits similaires

Se connecter