FL7760BM6X

Fabricant :	onsemi
Catégorie de produit :	LED Lighting Drivers
Série :	FL7760
Style de montage :	SMD/SMT
Emballage / Caisse :	SOT-23-6
Number of Outputs:	1 Output
Output Current:	1.5 A
Topology:	Buck
Operating Frequency:	1 MHz
Output Voltage:	4.5 V to 5.5 V
Température minimale de fonctionnement :	- 40 C
Température de fonctionnement maximale :	+ 125 C
Emballage :	Enrouleur
Emballage :	Ruban coupé
Emballage :	MouseReel
Features:	Constant Current
Marque :	onsemi
Input Voltage:	8 V to 60 V
Sensible à l'humidité :	Oui
Nombre de canaux :	1 Canal
Output Type:	Constant Current
Pd – Power Dissipation:	247 mW
Produit:	LED Drivers
Type de produit :	LED Lighting Drivers
Quantité d'emballage d'usine :	3000
Sous-catégorie :	Driver ICs
Supply Current – Max:	495 uA
Type :	Buck Controller
Largeur :	1.6 mm
Poids unitaire :	0.005722 oz

Plus d'informations

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

FL7760 CCM Buck Controllers

onsemi FL7760 CCM Buck Controllers are step-down controllers designed to adapt hysteretic reference architecture. This hysteretic reference architecture regulates LED current by sensing voltage across the external high-side sense resistor. By implementing hysteretic LED current control, the FL7760 buck controller stabilizes the LED current against input voltage and output load transient condition. These FL7760 Continuous Conduction Mode (CCM) controllers feature wide input range, high switching frequency, high source/sink current, and cycle-by-cycle peak current limit. FL7760 controllers implement analog dimming and PWM through a DIM pin and provide Undervoltage Lockout (UVLO) and Thermal Shutdown (TSD) protections. FL7760 controllers have low-reference voltage to maximize system efficiency and can minimize system profile in wide-scale power ranges through its high-frequency driving capability. onsemi FL7760 CCM buck controllers are ideal for LED lighting systems.

Avis

Il n’y a pas encore d’avis.

FL7760BM6X

Plus d'informations

IS32LT3175N/P Single-Channel Linear LED Drivers

FL7760 CCM Buck Controllers

Avis

Soyez le premier à laisser votre avis sur “FL7760BM6X” Annuler la réponse

Produits similaires

Se connecter