TPS92511DDA

Valmistaja:	Texas Instruments
Tuotekategoria:	LED Lighting Drivers
Sarja:	TPS92511
Asennustapa:	SMD/SMT
Pakkaus / kotelo:	SO-PowerPad-8
Number of Outputs:	1 Output
Output Current:	500 mA
Topology:	Buck
Operating Frequency:	50 kHz to 500 kHz
Output Voltage:	Adjustable
Pienin käyttölämpötila:	- 40 C
Suurin käyttölämpötila:	+ 125 C
Pakkaus:	Putki
Features:	Adjustable Switch Frequency, Enable/Shutdown, Integrated Switch, Thermal Shutdown
Tuotemerkki:	Texas Instruments
Dimming:	Analog, PWM
Input Voltage:	4.5 V to 65 V
Kosteudelle herkkä:	Kyllä
Kanavien määrä:	1 kanava
Output Type:	Constant Current
Tuotetyyppi:	LED Lighting Drivers
Tehdaspakkauksen määrä:	95
Alaluokka:	Driver ICs
Supply Current – Max:	2.7 mA
Tyyppi:	Inductive
Yksikön paino:	0.002490 oz

Lisätietoja

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92511 Constant Current Buck LED Driver

Texas Instruments TPS92511 Constant Current Buck LED Driver is an easy-to-use 65V constant current buck converter for driving a single LED string. This allows current up to 0.5A and with an efficiency of up to 95%. Only 5 external components are required for basic operation. A single-layer PCB layout is feasible because of the integration of an N-MOSFET. There is no external current sensing resistor, no external compensation and it includes the proper terminal assignment. A high-value external resistor programs the LED current so that fine-tuning of the LED current can be achieved. Another high-value external resistor programs a constant switching frequency from 50kHz to 500kHz. EMI design becomes easier as a result of the constant switching frequency. The TPS92511 from Texas Instruments provides a wide input voltage range from 4.5V to 65V. By adding simple external circuits, the device can handle applications with even higher input voltages.

Arviot

Tuotearvioita ei vielä ole.

TPS92511DDA

Lisätietoja

IS32LT3175N/P Single-Channel Linear LED Drivers

TPS92511 Constant Current Buck LED Driver

Arviot

Kirjoita ensimmäinen arvio tuotteelle “TPS92511DDA” Peruuta vastaus

Tutustu myös

Kirjaudu sisään