FL7760AM6X

Fabricante:	onsemi
Categoría de productos:	LED Lighting Drivers
Series:	FL7760
Estilo de montaje:	SMD/SMT
Paquete / Estuche:	SOT-23-6
Number of Outputs:	1 Output
Output Current:	2.5 A
Topology:	Buck
Operating Frequency:	1 MHz
Output Voltage:	4.5 V to 5.5 V
Temperatura mínima de funcionamiento:	- 40 C
Temperatura máxima de funcionamiento:	+ 125 C
Embalaje:	Carrete
Embalaje:	Cinta de corte
Embalaje:	MouseReel
Features:	Constant Current
Marca:	onsemi
Input Voltage:	8 V to 60 V
Sensible a la humedad:	Sí
Número de canales:	1 Canal
Output Type:	Constant Current
Pd – Power Dissipation:	247 mW
Producto:	LED Drivers
Tipo de producto:	LED Lighting Drivers
Cantidad del paquete de fábrica:	3000
Subcategoría:	Driver ICs
Supply Current – Max:	495 uA
Tipo:	Buck Controller
Anchura:	1.6 mm
Peso unitario:	0.006578 oz

Más información

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

FL7760 CCM Buck Controllers

onsemi FL7760 CCM Buck Controllers are step-down controllers designed to adapt hysteretic reference architecture. This hysteretic reference architecture regulates LED current by sensing voltage across the external high-side sense resistor. By implementing hysteretic LED current control, the FL7760 buck controller stabilizes the LED current against input voltage and output load transient condition. These FL7760 Continuous Conduction Mode (CCM) controllers feature wide input range, high switching frequency, high source/sink current, and cycle-by-cycle peak current limit. FL7760 controllers implement analog dimming and PWM through a DIM pin and provide Undervoltage Lockout (UVLO) and Thermal Shutdown (TSD) protections. FL7760 controllers have low-reference voltage to maximize system efficiency and can minimize system profile in wide-scale power ranges through its high-frequency driving capability. onsemi FL7760 CCM buck controllers are ideal for LED lighting systems.

Valoraciones

No hay valoraciones aún.

FL7760AM6X

Más información

IS32LT3175N/P Single-Channel Linear LED Drivers

FL7760 CCM Buck Controllers

Valoraciones

Sé el primero en valorar “FL7760AM6X” Cancelar respuesta

Productos relacionados

Inicio de sesión