ASL2507SHNY

Fabricante:	NXP
Categoría de productos:	LED Lighting Drivers
Series:	ASL2507SHN
Estilo de montaje:	SMD/SMT
Paquete / Estuche:	HVQFN-32
Number of Outputs:	2 Output
Topology:	Boost
Operating Frequency:	125 kHz to 700 kHz
Output Voltage:	Adjustable
Temperatura mínima de funcionamiento:	- 40 C
Temperatura máxima de funcionamiento:	+ 125 C
Embalaje:	Carrete
Embalaje:	Cinta de corte
Features:	Thermal Shutdown
Marca:	NXP Semiconductors
Input Voltage:	5.5 V to 40 V
Sensible a la humedad:	Sí
Número de canales:	2 Channel
Producto:	LED Lighting Drivers
Tipo de producto:	LED Lighting Drivers
Cantidad del paquete de fábrica:	6000
Subcategoría:	Driver ICs
Supply Current – Max:	250 uA
Tipo:	2 Phase
Parte # Aliases:	935307371518
Peso unitario:	0.006744 oz

Más información

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

ASLx507 DC-to-DC Boost Converters

NXP Semiconductors ASLx507 DC-to-DC Boost Converters include single and dual-phase ICs with a programmable limp-home mode. These boost converter ICs include one or two integrated gate drivers which drive external power MOSFETs and integrated Proportional-Integral (PI) controllers. NXP ASLx507 Boost Converters provide an SPI interface for extensive control and diagnostic communication with an external microcontroller. These boost converters allow configurable operation in the limp-home mode if SPI communication with the microcontroller fails. The outputs of the ASLx507 ICs operate according to predefined conditions stored in non-volatile memory (NVM) programmable by the customer in the limp-home mode.

Valoraciones

No hay valoraciones aún.

ASL2507SHNY

Más información

IS32LT3175N/P Single-Channel Linear LED Drivers

ASLx507 DC-to-DC Boost Converters

Valoraciones

Sé el primero en valorar “ASL2507SHNY” Cancelar respuesta

Productos relacionados

Inicio de sesión