LM3402MR/NOPB

Fabricante:	Texas Instruments
Categoría de productos:	LED Lighting Drivers
Series:	LM3402
Estilo de montaje:	SMD/SMT
Paquete / Estuche:	SO-PowerPad-8
Number of Outputs:	1 Output
Output Current:	500 mA
Topology:	Buck
Operating Frequency:	10 kHz to 1 MHz
Output Voltage:	40 V
Temperatura mínima de funcionamiento:	- 40 C
Temperatura máxima de funcionamiento:	+ 125 C
Embalaje:	Tubo
Features:	PWM Dimming, Constant Current
Marca:	Texas Instruments
Dimming:	PWM
Altura:	1.47 mm
Input Voltage:	6 V to 42 V
Longitud:	4.9 mm
Sensible a la humedad:	Sí
Número de canales:	1 Canal
Output Type:	Adjustable
Producto:	Step Down
Tipo de producto:	LED Lighting Drivers
Cantidad del paquete de fábrica:	95
Subcategoría:	Driver ICs
Supply Current – Max:	900 uA
Tipo:	Inductive
Anchura:	3.9 mm
Peso unitario:	0.002995 oz

Más información

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LM3402/LM3402HV Constant Current Buck Regulators

Texas Instruments LM3402/LM3402HV Constant Current Buck Regulators are monolithic switching regulators designed to deliver constant currents to high-power LEDs. Ideal for automotive, industrial, and general lighting applications, they contain a high-side N-channel MOSFET switch with a current limit of 735mA for step-down (Buck) regulators. Hysteretic control with controlled on-time is coupled with an external resistor. This allows the converter output voltage to adjust as needed to deliver a constant current to series and series – parallel-connected arrays of LEDs. They can be of varying number and type, LED dimming by pulse width modulation (PWM) or broken/open LED protection. Low-power shutdown and thermal shutdown complete the feature set available with this device.

Valoraciones

No hay valoraciones aún.

LM3402MR/NOPB

Más información

IS32LT3175N/P Single-Channel Linear LED Drivers

LM3402/LM3402HV Constant Current Buck Regulators

Valoraciones

Sé el primero en valorar “LM3402MR/NOPB” Cancelar respuesta

Productos relacionados

Inicio de sesión