TLC6C5748EVM

Ιδιότητες προϊόντος

Κατασκευαστής:	Texas Instruments
Προϊόν:	Evaluation Modules
Σειρά:	TLC6C5748
Τύπος προϊόντος:	LED Lighting Development Tools

Στείλτε έρευνα

Κατηγορία: Texas Instruments

Περιγραφή
Αξιολογήσεις (0)

Κατασκευαστής:	Texas Instruments
Κατηγορία προϊόντων:	LED Lighting Development Tools
Προϊόν:	Evaluation Modules
Για χρήση με:	TLC6C5748-Q1
Σειρά:	TLC6C5748
Μάρκα:	Texas Instruments
Τύπος προϊόντος:	LED Lighting Development Tools
Ποσότητα συσκευασίας εργοστασίου:	1
Υποκατηγορία:	Εργαλεία ανάπτυξης

Περισσότερες πληροφορίες

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

TLC6C5748EVM LED Driver Evaluation Module (EVM)

Texas Instruments TLC6C5748EVM LED Driver Evaluation Module (EVM) helps users evaluate the characteristics, operation, and use of the TLC6C5748-Q1. The Texas Instruments TLC6C5748-Q1 is a 48-channel, 16-bit, PWM LED driver with internal current settings mainly designed for automotive local dimming backlight. Each channel has an individually adjustable pulse width modulation (PWM), grayscale (GS) brightness control with 65,536 steps, and 128 steps of constant-current dot correction (DC). DC adjusts brightness deviation between channels. All channels have a 128-step global brightness control (BC). BC adjusts brightness deviation between the R, G, B color groups. The eight-step maximum current-control (MC) selects the maximum output current range for all channels of each color group. GS, DC, BC, and MC data are accessible with a serial interface port.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.

IS31FL3236A-QFLS2-EB Evaluation Board

ISSI IS31FL3236A-QFLS2-EB Evaluation Board is a fully assembled and tested board that uses the IS31FL3236/IS31FL3236A LED lighting drivers. The IS31FL3236 / IS31FL3236A drivers comprise 36x constant current channels, each with independent PWM control and designed for driving LEDs. The output current of each channel can be set at up to 38mA (max.) by an external resistor and independently scaled by a factor of 1, 1/2, 1/3, and 1/4. The average LED current of each channel can be changed in 256x steps by changing the PWM duty cycle through an I²C interface.

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.