NSV45020AT1G

Producent:	onsemi
Produktkategori:	LED Lighting Drivers
Serie:	NSI45020A
Monteringsstil:	SMD/SMT
Pakke/etui:	SOD-123
Number of Outputs:	1 Output
Output Current:	20 mA
Topology:	Boost, Buck
Operating Frequency:	100 Hz to 100 kHz
Output Voltage:	Adjustable
Minimum driftstemperatur:	– 55 C
Maksimal driftstemperatur:	+ 150 C
Qualification:	AEC-Q100
Emballage:	Spole
Emballage:	Klip tape
Emballage:	MouseReel
Features:	Constant Current
Brand:	onsemi
Input Voltage:	45 V
Antal kanaler:	1 kanal
Produkttype:	LED Lighting Drivers
Fabrikspakke Antal:	3000
Underkategori:	Driver ICs
Supply Current – Max:	22 mA
Enhedsvægt:	0.000412 oz

Mere information

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NSI45 Constant Current Regulators

onsemi NSI45 Constant Current Regulators are two-terminal linear constant current regulators. These regulators are simple, economical, and robust devices that provide a cost-effective solution for regulating current in LEDs. The NSI45 regulators are based on Self-Biased Transistor technology and regulate output current over a wide input voltage range. These regulators are designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and operating temperatures. The NSI45 regulators require no external components and have a high anode-cathode voltage rating that withstands surges common in automotive, industrial, and commercial signage applications.

Anmeldelser

Der er ingen anmeldelser endnu.

NSV45020AT1G

Mere information

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NSI45 Constant Current Regulators

Anmeldelser

Vær den første til at anmelde "NSV45020AT1G" Annuller svar

Relaterede produkter

Login