NSIC2050JBT3G

Producent:	onsemi
Produktkategori:	LED Lighting Drivers
REACH – SVHC:
Serie:	NSIC2050JB
Monteringsstil:	SMD/SMT
Pakke/etui:	SMB-2
Number of Outputs:	1 Output
Output Current:	50 mA
Topology:	Boost, Buck
Operating Frequency:	100 Hz to 100 kHz
Output Voltage:	Adjustable
Minimum driftstemperatur:	– 55 C
Maksimal driftstemperatur:	+ 175 C
Emballage:	Spole
Emballage:	Klip tape
Emballage:	MouseReel
Features:	Constant Current
Brand:	onsemi
Input Voltage:	120 V
Antal kanaler:	1 kanal
Output Type:	–
Pd – Power Dissipation:	3 W
Produkt:	Constant Current LED Drivers
Produkttype:	LED Lighting Drivers
Fabrikspakke Antal:	2500
Underkategori:	Driver ICs
Supply Current – Max:	34.5 mA
Enhedsvægt:	0.003280 oz

Mere information

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NSIC20x0 LED Drivers

onsemis NSIC20x0 LED Drivers use a linear Constant Current Regulator (CCR), a simple, economical and robust device designed to provide a cost-effective solution for regulating current in LEDs (similar to Constant Current Diode, CCD). The CCR is based on Self-Biased Transistor (SBT) technology and regulates current over a wide voltage range. It is designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and currents. The CCR turns on immediately and requires no external components allowing it to be designed as a high or low-side regulator. The 120V anode-cathode voltage rating is designed to withstand the high peak voltage incurred in A/C offline applications. The high anode-cathode voltage rating of the onsemis NSIC20x0 LED Drivers withstands surges common in automotive, industrial and commercial signage applications.

Anmeldelser

Der er ingen anmeldelser endnu.

NSIC2050JBT3G

Mere information

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NSIC20x0 LED Drivers

Anmeldelser

Vær den første til at anmelde "NSIC2050JBT3G" Annuller svar

Relaterede produkter

Login