NCV7691D10R2G

Producent:	onsemi
Produktkategori:	LED Lighting Drivers
Serie:	NCV7691
Monteringsstil:	SMD/SMT
Pakke/etui:	SOIC-8
Number of Outputs:	1 Output
Output Current:	25 mA
Topology:	Boost, Buck
Operating Frequency:	100 kHz
Output Voltage:	Adjustable
Minimum driftstemperatur:	- 40 C
Maksimal driftstemperatur:	+ 150 C
Qualification:	AEC-Q100
Emballage:	Spole
Emballage:	Klip tape
Emballage:	MouseReel
Features:	PWM Dimming, Constant Current
Brand:	onsemi
Input Voltage:	4.5 V to 18 V
Fugtfølsom:	Ja
Antal kanaler:	1 kanal
Driftsforsyningsspænding:	4.5 V to 18 V
Output Type:	Constant Current
Produkt:	LED Drivers
Produkttype:	LED Lighting Drivers
Fabrikspakke Antal:	3000
Underkategori:	Driver ICs
Supply Current – Max:	4 mA
Type:	Current Controller
Enhedsvægt:	0,019048 oz

Mere information

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NCV7691 Current Controller

onsemi NCV761 Current Controller provides an external NPN bipolar device to drive LEDs. The LED brightness levels are programmed using an external resistor with a bipolar transistor increasing the current range. The NCV7691 controller LED driver is flexible to add a single channel to multichannel systems. Features include Pulse Width Modulation (PWM) control, multiple LED string control, open LED string, and short-circuit LED string diagnostic. The current controller is Pb-free, and automotive-Q100 qualified. The onsemi NCV7691 is ideal for automotive LED lamps, Rear Combination Lamps (RCL), fog lights, and automotive linear current LED drivers.

Anmeldelser

Der er ingen anmeldelser endnu.

NCV7691D10R2G

Mere information

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NCV7691 Current Controller

Anmeldelser

Vær den første til at anmelde "NCV7691D10R2G" Annuller svar

Relaterede produkter

Login