NCV7691D10R2G

Výrobce:	onsemi
Kategorie výrobků:	LED Lighting Drivers
Série:	NCV7691
Způsob montáže:	SMD/SMT
Balení / pouzdro:	SOIC-8
Number of Outputs:	1 Output
Output Current:	25 mA
Topology:	Boost, Buck
Operating Frequency:	100 kHz
Output Voltage:	Adjustable
Minimální provozní teplota:	- 40 C
Maximální provozní teplota:	+ 150 C
Qualification:	AEC-Q100
Balení:	Naviják
Balení:	Střihací páska
Balení:	MouseReel
Features:	PWM Dimming, Constant Current
Značka:	onsemi
Input Voltage:	4.5 V to 18 V
Citlivost na vlhkost:	Ano
Počet kanálů:	1 kanál
Provozní napájecí napětí:	4.5 V to 18 V
Output Type:	Constant Current
Produkt:	LED Drivers
Typ výrobku: Dřevěné obaly na boty:	LED Lighting Drivers
Tovární balení Množství:	3000
Podkategorie:	Driver ICs
Supply Current – Max:	4 mA
Typ:	Current Controller
Hmotnost jednotky:	0,019048 oz

Více informací

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Solutions for Automotive IVN & Lighting

onsemi Solutions for Automotive IVN & Lighting provides energy-efficient solutions for automotive In-Vehicle Networking (IVN) and lighting to reduce emissions, improve fuel economy, and enhance lighting, safety, connectivity, and infotainment power delivery systems. These cost-effective in-vehicle networking (IVN) and lighting solutions offer low power consumption and high reliability.

NCV7691 Current Controller

onsemi NCV761 Current Controller provides an external NPN bipolar device to drive LEDs. The LED brightness levels are programmed using an external resistor with a bipolar transistor increasing the current range. The NCV7691 controller LED driver is flexible to add a single channel to multichannel systems. Features include Pulse Width Modulation (PWM) control, multiple LED string control, open LED string, and short-circuit LED string diagnostic. The current controller is Pb-free, and automotive-Q100 qualified. The onsemi NCV7691 is ideal for automotive LED lamps, Rear Combination Lamps (RCL), fog lights, and automotive linear current LED drivers.

Recenze

Zatím nejsou žádné recenze.

NCV7691D10R2G

Více informací

IS32LT3175N/P Single-Channel Linear LED Drivers

Solutions for Automotive IVN & Lighting

NCV7691 Current Controller

Recenze

Buďte první, kdo ohodnotí "NCV7691D10R2G" Zrušit odpověď na komentář

Související produkty

Přihlášení