TPS92692PWPR

Свойства на продукта

Производител:	Тексаски инструменти
Серия:	TPS92692
Опаковка / калъф:	HTSSOP-20
Брой на каналите:	1 канал
Продукт:	LED Drivers
Тип на продукта:	LED Lighting Drivers

Изпрати запитване

Категория: Тексаски инструменти

Описание
Отзиви (0)

Производител:	Тексаски инструменти
Категория продукти:	LED Lighting Drivers
Серия:	TPS92692
Стил на монтиране:	SMD/SMT
Опаковка / калъф:	HTSSOP-20
Number of Outputs:	1 Output
Output Current:	5 A
Topology:	Boost, Buck, Flyback, SEPIC
Operating Frequency:	800 kHz
Output Voltage:	Adjustable
Минимална работна температура:	- 40 C
Максимална работна температура:	+ 125 С
Опаковка:	Макара
Опаковка:	Изрязване на лентата
Опаковка:	MouseReel
Features:	Adjustable Switch Frequency, High Output Accuracy, Precision Dimming Control, Soft Start
Марка:	Тексаски инструменти
Dimming:	Analog, PWM
Input Voltage:	4.5 V to 65 V
Чувствителен към влага:	Да
Брой на каналите:	1 канал
Продукт:	LED Drivers
Тип на продукта:	LED Lighting Drivers
Фабрична опаковка Количество:	2000
Подкатегория:	Driver ICs
Supply Current – Max:	6.6 mA
Тип:	LED Controller
Широчина:	4.5 mm
Тегло на единицата:	0.004522 oz

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92692/TPS92692-Q1 LED Controllers

Texas Instruments TPS92692/TPS92692-Q1 High Accuracy LED Controllers support step-up/down LED driver topologies. Each device incorporates a rail-to-rail current amplifier to measure LED current and spread spectrum frequency modulation technique for improved EMI performance. These LED controllers can independently modulate LED current using analog or PWM dimming techniques. Linear analog dimming response with an over 15:1 range is obtained by varying the voltage across the high impedance analog adjust (IADJ) input. The PWM dimming of the LED current is achieved by directly modulating the DIM/PWM input pin with the desired duty cycle or enabling the internal PWM generator circuit. The PWM generator translates the DC voltage at the DIM/PWM pin to the corresponding duty cycle by comparing it to the internal triangle wave generator. The optional PDRV gate driver output can be used to drive an external P-Channel series MOSFET. The Texas Instruments TPS92692-Q1 device is AEC-Q100 qualified for automotive applications.

Отзиви

Все още няма отзиви.

TPS92692PWPR

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

TPS92692/TPS92692-Q1 LED Controllers

Отзиви

Напишете първия отзив за "TPS92692PWPR" Отказ

Свързани продукти

Вход