TPS92511DDA

Свойства на продукта

Производител:	Тексаски инструменти
Серия:	TPS92511
Опаковка / калъф:	SO-PowerPad-8
Брой на каналите:	1 канал
Тип на продукта:	LED Lighting Drivers

Изпрати запитване

Категория: Тексаски инструменти

Описание
Отзиви (0)

Производител:	Тексаски инструменти
Категория продукти:	LED Lighting Drivers
Серия:	TPS92511
Стил на монтиране:	SMD/SMT
Опаковка / калъф:	SO-PowerPad-8
Number of Outputs:	1 Output
Output Current:	500 mA
Topology:	Buck
Operating Frequency:	50 kHz to 500 kHz
Output Voltage:	Adjustable
Минимална работна температура:	- 40 C
Максимална работна температура:	+ 125 С
Опаковка:	Тръба
Features:	Adjustable Switch Frequency, Enable/Shutdown, Integrated Switch, Thermal Shutdown
Марка:	Тексаски инструменти
Dimming:	Analog, PWM
Input Voltage:	4.5 V to 65 V
Чувствителен към влага:	Да
Брой на каналите:	1 канал
Изходен тип:	Constant Current
Тип на продукта:	LED Lighting Drivers
Фабрична опаковка Количество:	95
Подкатегория:	Driver ICs
Supply Current – Max:	2.7 mA
Тип:	Inductive
Тегло на единицата:	0.002490 oz

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92511 Constant Current Buck LED Driver

Texas Instruments TPS92511 Constant Current Buck LED Driver is an easy-to-use 65V constant current buck converter for driving a single LED string. This allows current up to 0.5A and with an efficiency of up to 95%. Only 5 external components are required for basic operation. A single-layer PCB layout is feasible because of the integration of an N-MOSFET. There is no external current sensing resistor, no external compensation and it includes the proper terminal assignment. A high-value external resistor programs the LED current so that fine-tuning of the LED current can be achieved. Another high-value external resistor programs a constant switching frequency from 50kHz to 500kHz. EMI design becomes easier as a result of the constant switching frequency. The TPS92511 from Texas Instruments provides a wide input voltage range from 4.5V to 65V. By adding simple external circuits, the device can handle applications with even higher input voltages.

Отзиви

Все още няма отзиви.

TPS92511DDA

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

TPS92511 Constant Current Buck LED Driver

Отзиви

Напишете първия отзив за "TPS92511DDA" Отказ

Свързани продукти

Вход