CL25N8-G

Свойства на продукта

Производител:	Микрочип
Опаковка / калъф:	SOT-89
Брой на каналите:	1 канал
Тип на продукта:	LED Lighting Drivers

Изпрати запитване

Категория: MICROCHIP

Описание
Отзиви (0)

Производител:	Микрочип
Категория продукти:	LED Lighting Drivers
Стил на монтиране:	SMD/SMT
Опаковка / калъф:	SOT-89
Number of Outputs:	1 Output
Output Current:	25 mA
Topology:	Boost
Operating Frequency:	–
Output Voltage:	90 V
Минимална работна температура:	- 40 C
Максимална работна температура:	+ 125 С
Опаковка:	Макара
Опаковка:	Изрязване на лентата
Опаковка:	MouseReel
Features:	Constant Current
Марка:	Микрочипова технология
Input Voltage:	5 V to 90 V
Брой на каналите:	1 канал
Pd – Power Dissipation:	1.3 W
Тип на продукта:	LED Lighting Drivers
Фабрична опаковка Количество:	2000
Подкатегория:	Driver ICs
Supply Current – Max:	27.5 mA
Тегло на единицата:	0.004603 oz

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

CL25 Constant Current LED Driver

Microchip CL25 Temperature Compensated Constant Current LED Driver is a high voltage, temperature compensated, constant current source. This LED driver is trimmed to provide a constant current of 25mA ±10% at an input voltage of 5.0 – 90V, with no external components required. Microchip CL25 Temperature Compensated Constant Current LED Driver can be used as a two-terminal constant current source or constant current sink. A typical application for the CL25 is to drive LEDs with a constant current of 25mA. Multiple CL2s can also be used in parallel to provide higher currents such as 50mA, 75mA, or 100mA.

Отзиви

Все още няма отзиви.

CL25N8-G

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

CL25 Constant Current LED Driver

Отзиви

Напишете първия отзив за "CL25N8-G" Отказ

Свързани продукти

Вход