ASL2507SHNY

Свойства на продукта

Производител:	NXP
Серия:	ASL2507SHN
Опаковка / калъф:	HVQFN-32
Брой на каналите:	2 канала
Продукт:	LED Lighting Drivers
Тип на продукта:	LED Lighting Drivers

Изпрати запитване

Категория: NXP

Описание
Отзиви (0)

Производител:	NXP
Категория продукти:	LED Lighting Drivers
Серия:	ASL2507SHN
Стил на монтиране:	SMD/SMT
Опаковка / калъф:	HVQFN-32
Number of Outputs:	2 Output
Topology:	Boost
Operating Frequency:	125 kHz to 700 kHz
Output Voltage:	Adjustable
Минимална работна температура:	- 40 C
Максимална работна температура:	+ 125 С
Опаковка:	Макара
Опаковка:	Изрязване на лентата
Features:	Thermal Shutdown
Марка:	NXP Semiconductors
Input Voltage:	5.5 V to 40 V
Чувствителен към влага:	Да
Брой на каналите:	2 канала
Продукт:	LED Lighting Drivers
Тип на продукта:	LED Lighting Drivers
Фабрична опаковка Количество:	6000
Подкатегория:	Driver ICs
Supply Current – Max:	250 uA
Тип:	2 Phase
Част # Псевдоними:	935307371518
Тегло на единицата:	0.006744 oz

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

ASLx507 DC-to-DC Boost Converters

NXP Semiconductors ASLx507 DC-to-DC Boost Converters include single and dual-phase ICs with a programmable limp-home mode. These boost converter ICs include one or two integrated gate drivers which drive external power MOSFETs and integrated Proportional-Integral (PI) controllers. NXP ASLx507 Boost Converters provide an SPI interface for extensive control and diagnostic communication with an external microcontroller. These boost converters allow configurable operation in the limp-home mode if SPI communication with the microcontroller fails. The outputs of the ASLx507 ICs operate according to predefined conditions stored in non-volatile memory (NVM) programmable by the customer in the limp-home mode.

Отзиви

Все още няма отзиви.

ASL2507SHNY

Повече информация

IS32LT3175N/P Single-Channel Linear LED Drivers

ASLx507 DC-to-DC Boost Converters

Отзиви

Напишете първия отзив за "ASL2507SHNY" Отказ

Свързани продукти

Вход