CSTNR4M00GH5L000R0

خصائص المنتج

الصانع:	Murata
مسلسل:	BLM31KN_SN
منتج:	Ferrite Chip Beads
الحزمة / القضية:	1206 (3216 metric)
عدد القنوات:	1 قناة
نوع المنتج:	Ferrite Beads

إرسال الاستفسار

التصنيف: موراتا

الوصف
مراجعات (0)

الصانع:	Murata
فئة المنتج:	Ferrite Beads
مسلسل:	BLM31KN_SN
منتج:	Ferrite Chip Beads
Termination Style:	سمد/سمت
الحزمة / القضية:	1206 (3216 metric)
Impedance:	270 Ohms
Maximum DC Current:	4.5 A
Tolerance:	25 %
Maximum DC Resistance:	16 mOhms
الحد الأدنى لدرجة حرارة التشغيل:	– 55 C
درجة حرارة التشغيل القصوى:	+ 125 ج
طول:	3.2 mm
عرض:	1.6 mm
ارتفاع:	1.6 mm
Diameter:	–
التعبئة والتغليف:	بكرة
التعبئة والتغليف:	قطع الشريط
التعبئة والتغليف:	MouseReel
ماركة:	Murata Electronics
عدد القنوات:	1 قناة
نوع المنتج:	Ferrite Beads
كمية حزمة المصنع:	2500
تصنيف فرعي:	Ferrites
Termination:	–
Test Frequency:	100 MHz
وحدة الوزن:	0.001975 oz

معلومات اكثر

EMI Noise Suppression

Noise suppression has become an important issue, especially regarding electromagnetic interference (EMI) and electromagnetic compatibility (EMC). Murata provides engineers with complete support, including products and design-simulation software solutions based on expertise achieved through extensive on-site experience. This enables Murata to provide noise suppression solutions for a broad array of applications.

BLM31KN Automotive EMIFIL® Chip Ferrite Beads

Murata Electronics BLM31KN Automotive EMIFIL^® Chip Ferrite Beads are ideal for power supply circuits that require a high rated current. These beads are suitable for suppressing high-frequency noise over a wide frequency range in power supply circuits, and most are AEC-Q200 qualified. The AEC-Q200 ferrite beads are ideal for automotive applications such as infotainment and powertrain safety. The series includes non-automotive-grade beads, which are suitable for general purpose power supply circuit usage, including industrial, test equipment, factory automation, and networking. Murata Electronics BLM31KN Automotive EMIFIL Chip Ferrite Beads are packaged in a small 1206 case size (3.2mm x 1.2mm x 1.2mm) and achieve a high 6A impedance.

Power Supply Line Noise Suppression for Home Audio

Digital amplifiers are increasingly popular for home audio applications. In many cases, power is supplied from an AC outlet for home audio, and the conductive noise in the power supply cable is regulated under EMC standards. Therefore, it is necessary to prevent noise from leaking into the power supply line during audio playback. Here is an overview of noise problems in home audio cables and their solutions.

المراجعات

لا توجد مراجعات بعد.

CSTNR4M00GH5L000R0

معلومات اكثر

EMI Noise Suppression

BLM31KN Automotive EMIFIL® Chip Ferrite Beads

Power Supply Line Noise Suppression for Home Audio

المراجعات

كن أول من يقيم “CSTNR4M00GH5L000R0” إلغاء الرد

منتجات ذات صلة

تسجيل الدخول